Home Capabilities Home Battery
Residential ESS · 51.2V 16S Platform
Home Battery Storage: Wall-Mounted & Stackable LiFePO4
Two form factors on one 51.2V 16S platform: wall-mounted units at 5.12 and 10.24 kWh, and stackable towers that grow from 5.12 kWh to 60+ kWh. 6,000+ cycles at 90–95% DoD, IP65 wall enclosures, and CAN/RS485 protocol profiles for the inverter brands EU and US integrators actually install.
Home Battery Storage
Wall-Mounted & Stackable Home Storage
Wall units at 5.12 and 10.24 kWh, stackable towers past 60 kWh — 6,000+ cycles at 90–95% DoD.
Line Overview
One 51.2V Platform, Two Form Factors
Europe added more than one million home storage systems and 27.1 GWh in 2025 alone, and Germany already runs 2.2 million installed battery systems. Integrators buying at OEM volume need one platform that covers both the single-unit wall market and the stacked high-consumption segment — this is that platform.
- A-grade prismatic cells — CATL 280/314Ah or EVE LF280K; the LF280K is rated ~6,000 cycles (A-grade lots to 8,000) with ≤0.25 mΩ internal resistance, and every lot arrives with capacity and IR reports.
- 16S electrical architecture — 51.2V nominal, 41–58.4V window, 100A continuous charge and discharge with 200A peaks for 10 seconds.
- Inverter communication — CAN + RS485 with protocol profiles on file for Deye, Victron, Growatt, Sol-Ark, SMA and Luxpower.
- Parallel growth — 12–16 units in parallel; stackable towers reach 60+ kWh on the same BMS firmware.
- Factory process — laser-welded busbars, 7-day full-charge aging, and 100% end-of-line OCV, IR and capacity testing on every unit.
Specifications
Wall-Mounted & Stackable Datasheets
Wall-Mounted 51.2V Series
| Parameter | Wall-Mounted 100Ah | Wall-Mounted 200Ah |
|---|---|---|
| Configuration | 16S LiFePO4 · 51.2V 100Ah | 16S LiFePO4 · 51.2V 200Ah |
| Usable energy | 5.12 kWh | 10.24 kWh |
| Voltage window | 41–58.4V (charge 57.6–58.4V) | 41–58.4V |
| Cycle life | 6,000+ @90–95% DoD, 25°C | 6,000+ @90–95% DoD |
| Charge / discharge | 100A (1C) · 200A peak 10s | 100A (0.5C) continuous |
| Communication | CAN + RS485, six inverter profiles | CAN + RS485 |
| Parallel | up to 12–16 units | up to 12–16 units |
| Enclosure | IP65 wall cabinet | IP65 wall cabinet |
| Cells | CATL 280/314Ah or EVE LF280K A-grade | CATL 280/314Ah or EVE LF280K |
| Certifications | UN38.3 · IEC 62619 · CE | UN38.3 · IEC 62619 · CE |
| UL 1973 | optional, per-project program | optional, per-project program |
Stackable Tower Series
| Parameter | Stackable System |
|---|---|
| Module configuration | 51.2V 100Ah (16S LiFePO4) per module |
| Energy per module | 5.12 kWh |
| Stack energy range | 5.12–20.48 kWh in a 4-module tower |
| System expansion | stacking plus parallel, to 60+ kWh |
| Voltage window | 41–58.4V |
| Current per module | 100A continuous · 200A peak 10s |
| Communication | CAN + RS485, daisy-chained between modules |
| Protection rating | IP20–IP65 by configuration |
| Cycle life | 6,000+ @90–95% DoD |
| Certifications | UN38.3 · IEC 62619 · CE · UL 1973 optional |
Go Deeper
Sub-Lines, Compliance & Next Step
Wall-Mounted 51.2V
Single-unit installs for the volume market: 100Ah and 200Ah cabinets, IP65, bracket-mounted by one or two technicians in about 30 minutes. Full parameter table, BMS protection list and OEM options on the sub-line page.
View →Stackable Tower Systems
Base-plus-expansion modules for high-consumption homes: 5.12 kWh blocks stacked to 20.48 kWh per tower, paralleled to 60+ kWh, with self-heating modules for -20°C charging markets.
View →Certified for EU & US Entry
- UN 38.3 — all 8 transport tests
- IEC 62619 — industrial LFP safety
- CE — LVD / EMC, EU Battery Regulation 2023/1542 ready
- UL 1973 — per-project, US stationary ESS
- 10-year warranty on the home ESS line
Customization Process
How a Home-Battery Program Starts
Spec Review
Send capacity target, inverter model and annual volume. Within 24 hours an engineer confirms the 100Ah or 200Ah platform, or scopes a custom variant.
Proposal & Sampling
Quotation and spec sheet in 2 working days. Sample units with your BMS profile and inverter protocol follow in 15–20 days; sample fees credit against the first order.
Branding & Production
Enclosure color, silk-screen logo, packaging and protocol file are locked at 30% deposit. 100–500 units deliver in ~15 working days after deposit.
Delivery & Docs
IMDG sea freight from Yantian or Shekou with UN-certified packaging, UN38.3 test summary, MSDS and dangerous-goods declaration included.
Buyer Questions
Home Storage, Answered by the Numbers
Which inverters do your home batteries talk to?
How far can a single installation grow?
What warranty ships with the line?
Price a 51.2V Home ESS Program
Send capacity, inverter brand and annual volume — you get a platform recommendation, cell option and unit pricing within 24 hours.
